UEE50220
DIPLOMA OF ELECTRICAL AND
INSTRUMENTATION

The UEE50220 Diploma of Electrical and Instrumentation is a new qualification that supersedes UEE50211. It provides students with comprehensive knowledge and skills in instrumentation, PID Controlers, HMI's, Control Valves, PLC programming, microcontrollers and specification writing.

 

          Accredited course

          Flexible delivery - online or face            to face or mixed

          Emphasis practical component

          Small groups (max 6 students              on practical classes)

          Extensive presentations/videos            for online learning (click here                for example). 

          State of the art equipment

          No workplace sign-off required

PngItem_1304160.png
PngItem_1304160.png
PngItem_1304160.png
PngItem_1304160.png
PngItem_1304160.png
PngItem_1304160.png
PngItem_1304160.png

Specialised onsite training available on request. Contact us for details. ​

​Course Outline

​This course provides comprehensive knowledge and skills in instrumentation, PID Controlers, HMI's, Control Valves, PLC programming, microcontrollers and specification writing.

This qualification is made up of 18 core units and 2 elective units. 

Students that have a Certificate III in Instrumentation and Control (UEE31220 or UEE31211) will have Credit transfer to 13 units (in red at table below), so they will only need to complete a total of 7 units (units in white + units in blue). 

Students that have a Cert. IV in Electrical Instrumentation (UEE40220 or UEE40411) + a Certificate III in Instrumentation and Control (UEE31220 or UEE31211) will have Credit transfer to 13 units(in red + blue at table below), so they will only need to complete a total of 3 units (units in white). 

listunitsdiploma.png

Pre-requisites

To be eligible to undertake the course you must currently hold  a UEE30820 Certificate III in Electrotechnology Electrician OR a current ‘Unrestricted Electricians Licence’ or its equivalent issued in an Australian state or territory.

If students do not have an Unrestricted Electrical Licence but still wish to do some or all units of competency that are part of this qualification, they will be issued a Statement of Attendance (after Meo Training analized the situation and considered that the student has sufficient prior knowledge to attend the unit(s)).  

If students wish to enroll in just one or some of the units of competency that are part of this qualification, Meo Training will analize the situation and consider that the student has sufficient prior knowledge to attend the unit(s).  In those cases, they will be issued a Statement of Attendance or a Statement of Attainment (depending on the situation). 

Statement Of Attainment VS Statement Of Attendance

A statement of attainment is a formal qualification that is Nationally recognised and comes with the unit code. This indicates that you have attained the necessary competencies and completed the prerequisite units for a specific competency. 

A statement of attendance states that you have attended the course and completed the training but does not give you the Nationally recognised unit code like UEENEEE101A it only describes the name of the unit without the code.

Some employers would accept a statement of attendance and others would require the statement of attainment.

For both situation, students are offered the same training and assessments but, because the pre-requisites rquired by ASQA are not met, students can not receive the course codes on the Certificate. This system of statement of attendance was specifically designed by RTOs for Employers who want to send their employees to do a specific training unit and do not want to pay for the prerequisite units as they deem it is not necessary. The RTO will only deliver training without prerequisite units if it is safe to do so.

 For more information, please check ASQA Guidelines For Certificates here.

​Cost

Upgrade from Cert III in instrumentation and Control

                                        +                                                                                                           $2,400 (GST Free)

         Cert. IV in Electrical Instrumentation 

                           (total of 3 units)

Upgrade from Cert III in instrumentation and Control                                                $3,750 (GST Free)

                            (total of 7 units)

Full Qualification (from Electrical licence)                                                                    $11,400 (GST Free)

                         (total of 20 units)

 

*Prices are for upskilling from UEE40411/UEE40420 and UEE31211/31220. For older qualifications extra fees may occur, as there may be  extra units that need to be completed.

 

Check HERE for any special promotions that may be active. 

​Additional Information

For more additional information download the Qualification Brochure here

Course Overview

This qualification covers competencies to develop, select, install, commission, maintain and diagnose faults/malfunctions on electrical, instrumentation and control equipment and systems. 

Duration

Our flexible delivery allows students to progress at their own pace, therefore the duration will vary with experience and capabilities of different students.

The recommended duration of this qualification is 213h, for students that need to complete all the 20 units that are part of this qualifiation.

Students that have a Certificate III in Instrumentation and Control (UEE31220 or UEE31211) will have Credit transfer to 13 units, so they will only need to complete a total of 7 units. 

Students that have a Cert. IV in Electrical Instrumentation (UEE40220 or UEE40411) +Certificate III in Instrumentation and Control (UEE31220 or UEE31211) will have Credit transfer to 13 units, so they will only need to complete a total of 3 units

Delivery

This course consists of two parts:

  • Theory delivery and assessments - The theory delivery and assessments can be done online or face to face, or a blend between modes - some units can be completed at home and others face to face, depending on students needs, schedules and capabilities (recommended time: 123h). 

  • Practical delivery and assessessments - The practial delivery and assessments can be done on campus or online or a blend between modes - some units can be completed at home and others face to face, depending on students needs, schedules and capabilities. The total recommended time for practical assessments is 90h.  

  • For students that already hold a Certificate III in Instrumentation and Control and/or a Cert. IV in Electrical Instrumentation, this times are reduced according to the number of units that need to be done. 

Contact us to know more about our flexible delivery, Credit Transfers and how we can help you. 

Location

Our classes will take place at our Brisbane Campus at Suit 6, 28 Old Cleavland Road, Stones Corner, Brisbane, QLD. Remote Classes in Sydney are also available.

 

For other locations, please Contact us. We are available to take our training to where is needed (conditions apply - a minimum number of students is needed for remote classes).